This Service tool v4905 support for G1000, IP2770, IX6560, MP258, MG6170 printer also for G Series, IX Series, IP Series, MG Series, MP Series, MX Series, and PRO Series. Click links below to download for free.
- 02 Apr 2021 — Firmware Updates for EOS R5, EOS R6, EOS-1D X Mark III, RF70-200 f/2.8L IS USM and RF100-500 f/4.5-7.1L IS USM Thank you for using Canon products. We are pleased to share that the following products would be receiving firmware updates that further improves the functionality of your Canon product through.
- How to Manually Reset Canon Printers Without Using Any Software. STEP 1: Make sure that your printer is turned on. STEP 2: Press the power button (this will turn off/switch off your printer) STEP 3: Once turned off, press on STOP button for two (2) seconds. STEP 4: While holding on to the STOP button, press the power button at the same time for.
- Download Service Tool v4905 (password : errorandreset.com) or link 2
View other models from the same series. Software Development Kit Application. Drivers, Software & Firmware. Product Specifications.
This software cannot be used for Canon E series and MG24xx series printers. You can download Service Tool v4720 for E series Canon printers.
G2010 Canon Driver
Service tool v4905 Support OS:
- Windows XP
- Windows Vista
- Windows 7
- Windows 8
- Windows 8.1
- Windows 10
Canon G2010 Scanner Setup
Before using this software, make sure your Canon printer can enter into “service mode”, each printer has a different way to get into “service mode”. In general, here’s how to enter service mode on a Canon printer.
- Turn off the Canon printer, don’t unplugging the power cable.
- Press and hold Resume button then press the Power button.
- Keep pressing the Power button and release the Resume button.
- Then press the 5x Resume button.
- Then release all the Power & Resume buttons.
- The power LED will blink and you’re in Service Mode and your printer ready to reset.